dimensions (cm) | 420 x 500 x 590 |
basket (cm) | 350 x 350 |
cycle (sec.) |
120 |
washing arms |
|
glass cm |
19,5 |
flat diameter |
n.d. / n.a. |
trays |
- |
kw boiler/va |
3,3 / 3 |
pump kw |
0,26 |
kw tot. |
3,56 |
v/hz |
230/50 |
Cupwasher, Glasswasher, Dishwasher
Cupwasher, Glasswasher, Dishwasher
- Body made of corrosion resistant AISI 304 stainless steel throughout.
- Stainless steel gauge: 10/10, door hinges, handle and door limit stop made of 30/10 gauge steel to ensure the utmost reliability through time.
- Double skin door to reduce noise and heat loss with consequent savings in power consumption.
- Washing spray arms pressed in Ø18 stainless steel pipe which, thanks to the design solution adopted, produce an innovative 3D helical jet that affords enhanced washing performance.
- The rinse jets made of stainless steel are impervious to wear, thereby reducing maintenance costs.
-
Perforated rinse cap that allows adjustment of the rotor speed in the rinse cycle.
-
Basket runners made of Ø6 mm steel wire secured to 20/10 gauge brackets to accept both square and round baskets.
-
Physically separate wash and rinse circuits, each heated by a dedicated electrical heating element.
-
D.V.G.W. check valve that prevents water backflow to the supply line in the event of sudden pressure drops.
-
Wash and rinse cycles are separated by a drip interval to obtain optimum rinsing results and ensure the absence of detergent residues.
- Wash pump with thermal protection and internal cooling fan.
- Water heater insulated with a 5 mm thick jacket of self-extinguishing rubber to minimise heat loss, resulting in significant energy savings.
- Hydraulic rinse aid dispenser fitted as standard on all dishwashers.
- Electrical components located on front for fast and practical access during service and maintenance work.
-
Electrical and electronic components certified for professional applications, offering a higher guarantee, more reliability and increased durability.
- Hot water manual rinse provided as standard on all dishwashers (not present in conjunction with drain pump).
-
H07RNF certified power cable, water supply and drain hoses, all supplied as standard and pre-installed.
- Electrical prearrangement for retrofitting of drain pump.
-
Electrical prearrangement for installation of detergent dispenser and booster pump.
-
Stainless steel detergent dispenser injector fitted as standard on all dishwashers.
-
Overflow and pump strainer located at front of tank to permit easy access by operators.
- Automatic control of water level in tank; prevents connection of heaters with insufficient water level in tank.
- Manually resettable safety thermostat located directly on water heater and featuring easy access.
- Safety stop device in the event of accidental opening of door during wash cycle.
-
Handle with anti-cut design and door made of 30/10 gauge steel.
- Certified electrical components.
-
Non-toxic food grade rubber hoses designed to withstand high temperatures and pressure of up to 10 bar.
-
Central assembly made of acetyl resin, 7 mm thick, impact-proof and resistant to the corrosive action of detergents.
DD3 | Detergent dispenser 3l/h |
CA | Pressure booster pump |
DP50 |
Drain pump, 35W |
TS1 |
Thermostop |
TS2 |
Adjustable thermostop |
RF |
Cold rinse |